The world’s most powerful open source electric speed controllers are with you through Degz!

The world’s most powerful open source Electric Speed Controller now meets you with Degz! The VESC electric speed controller is at the heart of land, air, and sea vehicles, offering proven performance around the world. Drawing attention with its ability to work with high voltage up to 60V, VESC is ready to take your projects forward. With the comprehensive driver tuning software VESC Tool, you can easily program your motor driver and meet the feedback needs of your electric vehicles thanks to the regenerative braking feature. Supporting four control modes, VESC also offers safe and flexible use by supporting various protection functions and accelerometer modules. Discover your electronic speed driver and bring your projects to life!

Since VESC works with high voltage up to 60V, it must be used with caution!!

with VESC electric speed controller;

• You can use Utras in high performance.
• You can either design your own scooter or modify the one that you have.
• You can design and create high-performance underwater vehicles.

 

Comprehensive Drive Configuration Software: VESC Tool

You can easily program your electronic speed driver with the VESC interface
You can download VESC Tool by clicking here.

 

Regenerative Breaking

You can get the feedback your electric vehicles need directly from the electric speed driver. This means a longer range or more battery life (It is recommended that your batteries include a battery management system).

 

 

Technical Details:

• Continuous current 100A
• Instantaneous current 200A
• Voltage: 14V-60V (Cells: 4-13S; safe for 4S to 12S, voltage spikes cannot exceed 60V!!!)
• BEC: 5V @ 1A ERPM: 150000 Control
• Control Interface Ports: USB, CAN, UART
• Supported Sensors: ABI, HALL, AS5047, AS5048A
• Input Set Support: PPM, ADC, NRF, UART, SPI, IIC Modes: DC, BLDC, FOC (sinusoidal)
• Regenerative capacity: Yes
• Programmable Yes
• Motor wire 10AWG
• Power cable 8AWG
• Size: 75.4×63.7×31.1mm (including heat sink)
• Features: Support four control modes: Current / Duty Cycle / Speed / Position control mode.
• Protection functions: under voltage protection, high voltage protection, over current protection, abnormal temperature protection, mosfets over temperature protection.
  Support trolley stabilization function by connecting IMU module via IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.

 

Important tip:

It is recommended to use the factory firmware version 5.2, the new firmware update may damage the ESC.

Wiring Diagram:

 

Ready to Balance with Gyro (Content in English)

It comes suitable for operation with single-wheeled vehicles that provide balancing with VESC IMU.

Configuration for VESC board (Content in English)

You can watch below how VESC should be configured for electric skateboards.

Clıck for detaıled usage of vesc 6.9 100a electrıcal speed drıver !