5V and 12V Subsea Voltage Regulator
Single Regulator for All Power Needs !
Meet Degz’s new regulator. This card, which you can use safely for your projects, offers adjustable output voltage. This regulator, which easily meets the current needs of your SBC’s such as Nvidia or Raspberry Pi.
Specificiation
- Voltage Input : 8-36V / 3s-8s li-po
- 5V Maximum Output Current : 5000 mA
- 12V Maximum Output Current : 4000 mA
- 5V/12V Number of outputs : 3+3 Pin
- Input reverse connection protection: No (A high current diode can be connected in series)
Physicals
- Size: 45 x 45 mm
- Header Connector: 2.54 mm Header
- Power Connector: XT30
5V and 12V Output Voltage on the Same Card !
This regulator, which can provide high power output, has two outputs that can be adjusted between 5 Volt and 12 Volt. In this way, you can use it as two 5V/5A or two 12V/4A or 1 5V and 1 12V output.
You can get different voltage and current outputs from the Volt1 and Volt 2 outputs specified on the card. When the pads are combined as given in the schematic, the outputs you can get will be as follows:
Volt1: 12V 4000mA
Volt2: 5V 5000mA
You can also use both outputs as 5V or 12V at the same time.
Note: No voltage output is obtained until the pads on the back of the card are combined.
Easy via Connectors !
The card, which can be used with the standard XT30, can easily meet the power needs of autonomous projects.
