The world’s most powerful open source electric speed controllers are with you through Degz!
Discover the world’s most powerful open source VESC electronic speed driver with Degz! VESC electronic speed driver is at the heart of high-performance land, air and sea vehicles. While it stands out with its ability to work with high voltage up to 60V, it can be easily programmed with the comprehensive driver tuning software VESC Tool. Energy recovery is possible thanks to the regenerative braking feature. Specifications include 100A continuous current, 200A instantaneous current, and various control modes. In addition, these electronic speed drivers, which stand out with their VESC motor drive, various protection functions and sensor supports, increase the power of your electric vehicle projects.
The electronic speed drive VESC, which has proven itself around the world and forms the heart of many high-performance land, air and sea vehicles, is ready to take part in your projects. Since VESC works with high voltage up to 60V, it must be used with caution!
with VESC electric speed controller;
- You can use Utras in high performance.
- You can either design your own scooter or modify the one that you have.
- You can design and create high-performance underwater vehicles.
Comprehensive Drive Configuration Software: VESC Tool
You can easily program your electronic speed driver with the VESC interface
You can download VESC Tool by clicking here.
Regenerative Breaking
You can get the feedback your electric vehicles need directly from the electric speed driver. This means a longer range or more battery life. (It is recommended that your batteries include a battery management system).
Technical Details:
- Continuous current: 100A
- Instantaneous current: 200A
- Voltage: 14V-60V (Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V!!)
- BEC: 5V @ 1A ERPM: 150000 Kontrol
- Control Interface Ports: USB, CAN, UART
- Supported Sensors: ABI, HALL, AS5047, AS5048A
- Input Set Support: PPM, ADC, NRF, UART, SPI, IIC Modlar: DC, BLDC, FOC (sinüzoidal)
- Regenerative capacity: Yes
- Programmable: Yes
- Motor wire: 10AWG
- Power cable: 8AWG
- Size: 75.4×63.7×31.1mm (including heatsink)
- Features: Support four control modes: Current/Dutycycle/Speed /Position control mode.
- Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection.
- Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
Important tip:
It is recommended to use the factory firmware version 5.2, the new firmware update may damage the ESC.
Wiring Diagram:
Ready to Balance with Gyro (Content in English)
It comes suitable for operation with single-wheeled vehicles that provide balancing with VESC IMU.
Configuration for VESC board (Content in English)
You can watch below how VESC should be configured for electric skateboards.
