SpeedyBee F405 Wing Flight Board
SpeedyBee flight board set is designed as an autopilot board with Ardupilot and Inav support. This provides excellent performance for your autonomous flight projects. Thanks to Ardupilot support, you can install the board as ArduSub and use it as an alternative to Pixhawk. If you want to use it in underwater systems, you need to connect a compass sensor to the I2C port. For example, compass sensors such as HMC5883L can be connected via I2C. After the I2C connection is made, you need to enable the External Compass option in MissionPlanner.
3 Boards In 1
This SpeedyBee flight board set consists of three main boards: Control Board, Power Distribution Board and Wireless Connection Board. The Power Distribution Board provides three separate voltage outputs: 5V for the control board, adjustable 9V or 12V for video transmitter systems and adjustable 5V, 6V or 7.2V for servos. The power input is between 7-36V and is recommended for use with a maximum 6S battery.
Supported Apps!
Wireless Connectivity Card allows you to easily connect to applications such as SpeedyBee App, MissionPlanner, QGroundControl via Bluetooth and Wi-Fi. This feature enables remote management and control of the board. It makes it possible for users to monitor and manage their projects more effectively. With its powerful performance and wide range of connectivity options, SpeedyBee F405 Wing is the ideal choice for your autonomous flight projects.
| Product | SpeedyBee F405 WING FC Card |
| MCU | STM32F405,168MHz,1MB Flash |
| IMU(Gyro&Accelerometer) | ICM-42688-P |
| Barometer | SPL006-001 |
| OSD Chip | AT7456E |
| Blackbox | MicroSD Card Slot |
| UART | 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)) |
| I2C | 1x Used for magnetometer, digital airspeed sensor |
| ADC | 4x (VBAT, Current, RSSI, Analog AirSpeed) |
| PWM | 12x (11+1 “LED “pad) |
| ELRS/CRSF receiver | Supported,connected to UART1 |
| SBUS | Built in inverter for SBUS input (UART2-RX) |
| LED | 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB |
| RSSI | Supported,Named as RS. |
| Supported FC Firmware | INAV:SpeedyBeeF405WING(default) ArduPilot: SpeedyBeeF405WING |
| Weight | 8.9g |
| Product | SpeedyBee F405 WING PDB Card |
| Input voltage range | 7~36V (2~6S LiPo) |
| Battery Voltage Sensor | Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) |
| Battery Current Sensor | 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot) |
| TVS Protective diode | Yes |
| FC BEC output | Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip |
| VTX BEC output | Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter, Digital Video Transmitter, Camera. |
| Servo BEC output | Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos. |
| Weight | 11.4g |
| Product | SpeedyBee F405 WING Wireless Card |
| Wireless Configuration (long press BOOT button for 6 seconds to switch modes) | BLE mode, connect to Speedybee APP |
| Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc. | |
| Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner | |
| LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) | 4x WS2812 LED strip connectors, adjustable colors and flashing modes |
| Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads | |
| On-board battery level indicator | 4x RGB indicator LED for battery level display by number of lights |
| Weight | 4.2g |
